BoatBlog

Thursday, December 22, 2005

Giving the cleats the correct angle to match the hull: transferring angles from the hull to the sanding disk.

posted by Niel Malan @ 14:10

I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.

Previous Posts

• The solution: a spacer made of plywood and chipbo...
• The challenge: installing parallel bulkheads in a...
• All four bulkheads ready for fitting to the dingh...
• The workbench where the attachment of cleats to a...
• The first bulkhead (midships seat forward) to hav...
• Moulding in progress: waiting for the resin to cure.
• Pouring the resin mix.
• Make a polyurethane elastomer: measuring off the ...
• Checking the inspection cover backbones for fit.
• Making the inspection covers. Here the inspection...