The skeg in place with screws and glassfibre.
posted by Niel Malan @ 14:01
Saturday, December 31, 2005
I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.
Previous Posts
- Showing the location of the skeg.
- Attaching the runners: with the straight portions...
- Attaching the runners: the straight portions stuc...
- Capsize! Clamping the dinghy in this position all...
- Motivational visualisation ...
- The seat tops with the screw head holes filled wi...
- Step 20. Sand the entire boat, inside and out .......
- Motivational picture of the day ...
- Left: The daggerboard slot cut in the bottom of t...
- The daggerboard casing now permanently fixed in p...
0 Comments:
Post a Comment
<< Home