BoatBlog

Monday, December 19, 2005

Sticky job: all the inside seams fibreglassed with a single layer of fibreglass.

posted by Niel Malan @ 19:03

I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.

Previous Posts

• Finished with the tying. The hull now has its sha...
• Tied up: Copper wire ties on all the seams.
• Eight sheafs of ten each: eighty ties ready for t...
• Glueing in the mast step (invisible under the cla...
• The side panels are now loosely attached, and the...
• The side panels loosely joined with copper wire s...
• Tighten the stiches, and the bottom becomes grace...
• The panels now have the copper wire stiches put i...
• The bottom and side panels now have their bow pie...
• Here's the bow seat bulkhead, made of two pieces ...