BoatBlog

Wednesday, January 04, 2006

I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.

Previous Posts

• Laminating the port side shear strake.
• The completed starboard side shear strake.
• The transom woodwork ready for installation.
• Using all the clamps in the shop to laminate the ...
• Dry-fitting the shear strakes before lamination.
• Special alignment/clamping blocks that will assis...
• The prepared strips of wood that will form the sh...
• Preparing to laminate the rubbing strips: all the...
• With the seat tops screwed down the little dinghy...
• It doesn't show, but there's a second layer of pr...

---