The mast joint. One half fits tightly into the top section of the mast, the other half more loosely in the bottom section of the mast.
posted by Niel Malan @ 13:17
Thursday, December 23, 2010
The mast joint. One half fits tightly into the top section of the mast, the other half more loosely in the bottom section of the mast.
I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.
Previous Posts
- The finished gooseneck. It came out differently t...
- I've completed the turning work on the mast head ...
- I've made progress on the gooseneck. This one is...
- I've made progress on the mast head and mast foot...
- These two strips of stainless steel and bar of br...
- Here are the mast sections and boom, cut to length.
- These are two blanks for making plugs for the end...
- Here's the raw material for the mast and boom. It...
- The water chuckles at the stem. The oars clunk in...
- There's the little Argie 10 with the paint job com...
0 Comments:
Post a Comment
<< Home