BoatBlog

Thursday, December 22, 2005

The first bulkhead fixed in place. It is about two millimeters too far towards the stern.

posted by Niel Malan @ 19:13

I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.

Previous Posts

• Polyurethane sticks to skin and is very difficult...
• The inspection ports and covers completed.
• Giving the cleats the correct angle to match the ...
• The solution: a spacer made of plywood and chipbo...
• The challenge: installing parallel bulkheads in a...
• All four bulkheads ready for fitting to the dingh...
• The workbench where the attachment of cleats to a...
• The first bulkhead (midships seat forward) to hav...
• Moulding in progress: waiting for the resin to cure.
• Pouring the resin mix.