BoatBlog

Wednesday, January 04, 2006

The shear strakes attached to the hull. Some clamps will stay in place while the adhesive cures overnight.

posted by Niel Malan @ 20:54

I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.

Previous Posts

• Planing a shear strake using a spokeshave.
• Laminating the port side shear strake.
• The completed starboard side shear strake.
• The transom woodwork ready for installation.
• Using all the clamps in the shop to laminate the ...
• Dry-fitting the shear strakes before lamination.
• Special alignment/clamping blocks that will assis...
• The prepared strips of wood that will form the sh...
• Preparing to laminate the rubbing strips: all the...
• With the seat tops screwed down the little dinghy...