Here's a picture of the rudder box, with the front end of the tiller glued and clamped. It's a poorly done piece of work, but it should do the job.
posted by Niel Malan @ 13:14
Monday, December 27, 2010
Here's a picture of the rudder box, with the front end of the tiller glued and clamped. It's a poorly done piece of work, but it should do the job.
I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.
Previous Posts
- No picture, but I've assembled the new rudder box....
- I'm building the rudder box. I've made a mistake ...
- After a lot of small pictures, here's a big pict...
- The plans says nothing about it, but I decided to...
- The gooseneck end of the boom. Don't be fooled by...
- The mast joint. One half fits tightly into the to...
- The finished gooseneck. It came out differently t...
- I've completed the turning work on the mast head ...
- I've made progress on the gooseneck. This one is...
- I've made progress on the mast head and mast foot...
0 Comments:
Post a Comment
<< Home