The transom woodwork installed. I was too tired too clear away the tools before taking the picure.
posted by Niel Malan @ 20:58
Wednesday, January 04, 2006
The transom woodwork installed. I was too tired too clear away the tools before taking the picure.
I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.
Previous Posts
- The shear strakes attached to the hull. Some clam...
- Planing a shear strake using a spokeshave.
- Laminating the port side shear strake.
- The completed starboard side shear strake.
- The transom woodwork ready for installation.
- Using all the clamps in the shop to laminate the ...
- Dry-fitting the shear strakes before lamination.
- Special alignment/clamping blocks that will assis...
- The prepared strips of wood that will form the sh...
- Preparing to laminate the rubbing strips: all the...
0 Comments:
Post a Comment
<< Home