BoatBlog

Tuesday, December 20, 2005

The daggerboard casing and the rudder box panels are varnished and ready for assembly.

posted by Niel Malan @ 19:11

I am building the Argie 10 sailing dinghy. Its a simple design suitable for beginners.

Previous Posts

• A productive day at the mitre saw: cleats for scr...
• A completed inspection port seal. This side will ...
• Casting the seals of the inspection ports on two ...
• Gluing in the mast collars on the model. This is ...
• Sticky job: all the inside seams fibreglassed wit...
• Finished with the tying. The hull now has its sha...
• Tied up: Copper wire ties on all the seams.
• Eight sheafs of ten each: eighty ties ready for t...
• Glueing in the mast step (invisible under the cla...
• The side panels are now loosely attached, and the...